What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 10:26

the problem then depends on "how fast does the fuse operate?".
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This one hit behind the barn.
Denise Austin’s 5 Habits to Tackle Stubborn Belly Fat - Eat This Not That
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Something Deep in Our Galaxy Is Pulsing Every 44 Minutes. No One Knows Why. - AOL.com
2024–10–10[John johnson John Johnson ]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
One
What does a fuse do?
If you could go back and rewrite the Legend of Korra, what would you change, and why?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What pleasure do guys get by sucking female breasts?
It also is a device that limits the change in current flow.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The bolt then partially travels down the line to your home.
There are three different concepts here that are getting confused.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
but this device (an Inductor) … impedes the rapid changes in the current.
Live Updates: FSU 5, Miss. St. 2 -- FINAL - 247Sports
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The other is “what does a “fuse” do?”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
One is “what exactly is in a ‘surge protector’ ? ”
Forget drones, Amazon has new robots that could replace humans - TheStreet
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then asserts :
what exactly is a ‘surge’ protector?
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Gold Climbs as Rising Geopolitical and Trade Tensions Aid Havens - Bloomberg.com
A circuit breaker is similar, but is resettable.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
For this case there are devices called Metal oxide varistors (MOV).
He said he loves me, but why is it difficult for him to leave his wife?
eight
This is 'the assistant's answer'
An AC voltage/ current source, and an ac inductive load.
But it can get overloaded, and no longer works.
But… the neutral is now “floating” because of the 1 ohm resistance.
It seems Mohan does not understand the difference between a comment and an Answer.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
[old diagram got deleted by accident]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
nine
This is where the MOV conducts again, and dissipated the energy.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Here is a simplified AC power diagram.
a photo is worth a thousand words.
There are two important concepts here.
This device then solves the entire problem.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
but I think this circuit , shows a few more pieces.
First Sentence:
I post the exact comment here.
He then describes the function of a fuse.
These devices are installed between the “hot” and “neutral” and protective ground.
Upvotes:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is where this question deviates from being a 'generic' question, and becomes more specific.
In schematic diagrams this is the symbol for a fuse:
At one ohm, the resistor has a maximum of 1 watt power.
At least they know the answer if they wanted it.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
He then describes Rainy Season and Lightning.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
so, what happens?
A fuse is a non-resetable over current circuit protector.
What is lightning?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Edit 2024–10.
Barnstars:
The third is lightning and “how it gets conducted into a home.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
[image of Common-mode choke]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Because the load is inductive, the current lags the voltage.(by a bit).
Now when you have a certain ac resistance, then a current flows in a loop.
(Dc diagram shown, AC is similar).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.